High-Temperature Resistant HEPA Filter

part of Air Filters, Leave a comment , 300 ViewsTags: ,

Key Properties

YNClean High-temperature HEPA filter is a deep-pleat structure. It is made of high-temperature resistant glass fiber or ultra-fine glass fiber filter paper, aluminum foil separator, stainless steel frame, and special high-temperature resistant sealant.

  • Efficiency: H13 – H14/EN1822
  • Media: H13-H14 glassfiber or U15-U17 American HV glassfiber
  • Frame Material: Galvanized steel,Stainless steel,Aluminum alloy
  • Sealing strip: PTFE strip(350~400 Celsius)
  • Air Volume(m³/h): 450-2700m³/h as the size customized
  • Separator: Hot melt bead
  • Optional thickness: 220 ~ 305mm
  • Max Temperature: 70℃
  • Max Humidity: 100%

Features and Benifit

High-temperature HEPA filter is a deep-pleat structure. It is made of high-temperature resistant glass fiber or ultra-fine glass fiber filter paper, aluminum foil separator, stainless steel frame, and special high-temperature resistant sealant.
Each of them is strictly tested and resistant. High-temperature filters are mainly used in equipment and systems that require high-temperature air purification such as ultra-clean ovens, super-cleaning machines, and chemical industries.

  • The filter medium has 180-degree pleats on both sides, the two indentations when the filter material is bent make it open into a wedge layer at the end of the separator and prevent the filter material from being damaged.
  • The unique frame design of a 1.5-2.00mm stainless steel frame increases the overall strength
  • High-quality glass fiber filter paper of 4mm increases its dust-holding capacity, large resistance, and high filtration efficiency.
  • 0.03mm aluminum foil partition in a corrugated structure not only can protect the filter paper from damage but also can reduce the wind speed evenly through the resistance
  • Stainless steel face supporting bar&High temperature resistant rubber gasket can reduce the movement of filter and make it more stable when working

Frame Material:

Aluminum profile, aluminum plate, galvanized sheet stainless steel frame can be selected below 250 Celsius. Above 250 degrees Celsius, a stainless steel frame must be used. Sealing strip: PTFE strip(350~400 Celsius); The filter medium has 180-degree pleats on both sides, the two indentations when the filter material is bent make it open into a wedge layer at the end of the separator and prevent the filter material from being damaged.

Application

High-Temperature Resistant HEPA Filter is Especially suitable for high-temperature infusion production conditions and terminals for air-conditioning ventilation systems (end-filtering and hot-air high-temperature ovens, ovens). such as The hospital’s operating room, hospital, bio-pharmaceuticals, laboratories, circuit boards, microelectronics, optics, LED optoelectronics, QS food processing or purification equipment, high-temperature requirements of the clean working environment.

Custom Designs

The High-Temperature Resistant HEPA Filter size is made according to the actual requirements of customers.

Common Specifications

Model Overall Dimension(WHDmm) Rated Air Volume(m³/h) Filtration Area(㎡) Dust Holding Capacity(g) Initial Pressure(air velocity 0.5m/s) Final Pressure Efficiency
YN-HHF-001 484*484*120 450 4.3 250 ≤120 Pa 400 Pa H13-H14(99.95%-99.995%)
YN-HHF-002 610*610*120 750 6.9 400 ≤120 Pa 400 Pa H13-H14(99.95%-99.995%)
YN-HHF-003 915*610*120 1100 10.4 600 ≤120 Pa 400 Pa H13-H14(99.95%-99.995%)
YN-HHF-004 484*484*150 600 5.85 350 ≤120 Pa 400 Pa H13-H14(99.95%-99.995%)
YN-HHF-005 610*610*150 1000 9.39 550 ≤120 Pa 400 Pa H13-H14(99.95%-99.995%)
YN-HHF-006 915*610*150 1500 14.19 850 ≤120 Pa 400 Pa H13-H14(99.95%-99.995%)
YN-HHF-007 484*484*220 1000 9.22 550 ≤120 Pa 400 Pa H13-H14(99.95%-99.995%)
YN-HHF-008 630*630*220 1500 14.8 850 ≤120 Pa 400 Pa H13-H14(99.95%-99.995%)
YN-HHF-009 915*610*220 2500 22.35 1300 ≤120 Pa 400 Pa H13-H14(99.95%-99.995%)
YN-HHF-010 1220*610*220 2700 24.34 1500 ≤120 Pa 400 Pa H13-H14(99.95%-99.995%)